Data collection and handling. Examples of such vehicles are electrically-powered cars, motorcycles, scooters, three- and four-wheeled vehicles or motorcycles, trucks, locomotives, bicycles (pedal cycles with an electric motor) and other vehicles of this type (e.g., self-balancing vehicles or vehicles not equipped with at least one seating position), lawn tractors, self-propelled farming and construction equipment, boats, aircraft, wheelchairs and other mobility aids. 173 For adhesives, printing inks, printing ink-related materials, paints, paint-related materials, and resin solutions which are assigned to UN3082, and do not meet the definition of another hazard class, metal or plastic packaging for substances of packing groups II and III in quantities of 5 L (1.3 gallons) or less per packaging are not required to meet the UN performance package testing when transported: a. For criteria in determining what is a new lighter design, see 173.308(b)(1). 66 Formulations of these substances containing not less than 30 percent non-volatile, non-flammable phlegmatizer are not subject to this subchapter. For the purpose of this special provision, vehicles are self-propelled apparatus designed to carry one or more persons or goods. 49 U.S.C. A37 This entry applies only to a material meeting the definition in 171.8 of this subchapter for self-defense spray. If a frangible disc is required in series with the reclosing pressure relief device for the specified portable tank, the alternative portable tank must be fitted with a frangible disc in series with the reclosing pressure relief device; and, (1) When two effective means are specified, the alternative portable tank is fitted with bottom openings having two or three effective means of closure or no bottom openings; or, (2) When three effective means are specified, the portable tank has no bottom openings or three effective means of closure; or. 11 The hazardous material must be packaged as either a liquid or a solid, as appropriate, depending on its physical form at 55 C (131 F) at atmospheric pressure. c. The time between offering the material for transportation at the point of origin, and unloading the material at the destination does not exceed 48 hours. Solids meeting the definition of an elevated temperature material must be transported in accordance with the applicable requirements of this subchapter. Limited propagation means that if one booster near the center of the package is exploded, the aggregate weight of explosives, excluding ignition and delay charges, in this and all additional boosters in the outside packaging that explode may not exceed 25 g. 116 Fuzes, detonating may be classed in Division 1.4 if the fuzes do not contain more than 25 g of explosive per fuze and are made and packaged so that they will not cause functioning of other fuzes, explosives or other explosive devices if one of the fuzes detonates in a shipping packaging or in adjacent packages. 170 Air must be eliminated from the vapor space by nitrogen or other means. 6. 176 This entry must be used for formaldehyde solutions containing methanol as a stabilizer. 148 For domestic transportation, this entry directs to 173.66 for: a. When a plus sign is assigned to mix- 430 This entry shall only be used for solid medical waste of Category A transported for disposal. (3) A flammable gas is a gas that meets the criteria in 173.115 of this subchapter. The proper shipping name Paint related material may be used for consignments of packages containing Paint and Paint related material in the same package; b. The examination and testing of each lighter design must be performed by a person authorized by the Associate Administrator under the provisions of subpart E of part 107 of this chapter, as specified in 173.308(a)(4). It may not be used to describe articles, machinery, or apparatus for which a proper shipping name exists in the 172.101 Table. This training must be documented in training records required by 172.704(d). 368 In the case of non-fissile or fissile-excepted uranium hexafluoride, the material must be classified under UN3507 or UN2978. 22 If the hazardous material is in dispersion in organic liquid, the organic liquid must have a flash point above 50 C (122 F). N87 The use of copper valves on UN pressure receptacles is prohibited. d. Receptacles containing adsorbed or absorbed ammonia shall meet the following conditions: (1) Receptacles shall be made of a material compatible with ammonia as specified in ISO 11114-1:2012(E) and ISO 11114-1:2012/Amd 1:2017(E) (IBR, see 171.7 of this subchapter); (2) Receptacles and their means of closure shall be hermetically sealed and able to contain the generated ammonia; (3) Each receptacle shall be able to withstand the pressure generated at 85 C (185 F) with a volumetric expansion no greater than 0.1%; (4) Each receptacle shall be fitted with a device that allows for gas evacuation once pressure exceeds 15 bar (1500 kPa) without violent rupture, explosion or projection; and. However, the hazard label corresponding to the hazard class or division may be substituted for the marking. When there is an entry in this column, refer to Section 172.102 of the federal regulations for specific information. A60 Sterilization devices, when containing less than 30 mL per inner packaging with not more than 150 mL per outer packaging, may be transported in accordance with the provisions in 173.4a, irrespective of 173.4a(b), provided such packagings were first subjected to comparative fire testing. B59 Water-tight, sift-proof, closed-top, metal-covered hopper cars are also authorized provided that the lading is covered with a nitrogen blanket. Column 4 specifies the applicability of 178.275(g)(3) of this subchapter for the pressure relief devices. In addition, MC 312 and DOT 412 cargo tank motor vehicles must: a. Additionally, the offeror must notify the carrier if the tank pressure rise exceeds 3 psig over any 24-hour period. Each transport unit must be leakproof when used as bulk packaging. If you would like to comment on the current content, please use the 'Content Feedback' button below for instructions on contacting the issuing agency. Retain a copy of each notification of pilot-in-command if requested for up to 30 days Which one of the following hazardous materials is NOT excepted from the quantity limitations in 175.75? 141 A toxin obtained from a plant, animal, or bacterial source containing an infectious substance, or a toxin contained in an infectious substance, must be classed as Division 6.2, described as an infectious substance, and assigned to UN 2814 or UN 2900, as appropriate. 177 Gasoline, or, ethanol and gasoline mixtures, for use in internal combustion engines (e.g., in automobiles, stationary engines and other engines) must be assigned to Packing Group II regardless of variations in volatility. 127 Mixtures containing oxidizing and organic materials transported under this entry may not meet the definition and criteria of a Class 1 material. B135 For Large Packagings offered for transport by vessel, flexible or fibre inner packagings shall be hermetically sealed. 163 Substances must satisfactorily pass Test Series 8 of the UN Manual of Tests and Criteria, Part I, Section 18 (IBR, see 171.7 of this subchapter). 105 The word Agents may be used instead of Explosives when approved by the Associate Administrator. D. Class 5 materials The manufacturer must provide such information to a representative of the Department upon request. 102 The ends of the detonating cord must be tied fast so that the explosive cannot escape. Radiation detectors transported as individual components must be transported as follows: (1) They must be packed in a sealed intermediate plastic liner with sufficient absorbent or adsorbent material to absorb or adsorb the entire gas contents. Table 1 authorizes IBCs for specific proper shipping names through the use of IB Codes assigned in the 172.101 table of this subchapter. This entry may not be used for ammonium nitrate for which a proper shipping name already exists in the 172.101 Hazardous Materials Table, including ammonium nitrate mixed with fuel oil or any other commercial grade of ammonium nitrate (e.g., ammonium nitrate fertilizer). If a vehicle is powered by a flammable liquid and a flammable gas internal combustion engine, it must be described using Vehicle, flammable gas powered. This includes hybrid electric vehicles powered by both an internal combustion engine and wet, sodium or lithium batteries installed. Nickel-metal hydride button cells or nickel-metal hydride cells or batteries packed with or contained in battery-powered devices transported by vessel are not subject to the requirements of this special provision. (7) The design type of the article must be subjected to the following test. The material is also be subject to operational controls which include not exceeding a temperature of 55C (130F) at the time it is offered or during transportation, not exceeding a transportation time of 24 hours, and drivers transporting spent bleaching earth must be trained in the properties and hazards of the spent bleaching earth. N37 This material may be shipped in an integrally-lined fiber drum (1G) which meets the general packaging requirements of subpart B of part 173 of this subchapter, the requirements of part 178 of this subchapter at the packing group assigned for the material and to any other special provisions of column 7 of the 172.101 table. (v) UN and IM portable tank codes/special provisions. TP21 The wall thickness must not be less than 8 mm. These packagings are not required to: (1.) B14 Each bulk packaging, except a tank car or a multi-unit-tank car tank, must be insulated with an insulating material so that the overall thermal conductance at 15.5 C (60 F) is no more than 1.5333 kilojoules per hour per square meter per degree Celsius (0.075 Btu per hour per square foot per degree Fahrenheit) temperature differential. (h) Column 7: Special provisions. N7 The hazard class or division number of the material must be marked on the package in accordance with 172.302 of this subchapter. A35 This includes any material which is not covered by any of the other classes but which has an anesthetic, narcotic, noxious or other similar properties such that, in the event of spillage or leakage on an aircraft, extreme annoyance or discomfort could be caused to crew members so as to prevent the correct performance of assigned duties. c. A composite packaging 6PG2 (glass, porcelain or stoneware receptacles within a fiberboard box). 149 When transported as a limited quantity or a consumer commodity, the maximum net capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to 5 L (1.3 gallons). The map below, compiled from data provided by the Federal Emergency Management Agency (FEMA), is the most accurate nuclear attack map and fallout demonstration available for 2023: (Image courtesy of FEMA and Halcyon Maps) The fallout would rapidly spread, turning targeted cities into whole affected regions. If the air bag inflator unit satisfactorily passes the series 6(c) test, it is not necessary to repeat the test on the air bag module. be marked with the hydrostatic pressure test marking specified in 173.24a(b)(4). B61 Written procedures covering details of tank car appurtenances, dome fittings, safety devices, and marking, loading, handling, inspection, and testing practices must be approved by the Associate Administrator before any single unit tank car tank is offered for transportation. In addition to the packaging required in 173.4a, each glass inner packaging must be placed in a sealed plastic bag compatible with ethylene oxide and capable of containing the contents in the event of breakage or leakage of the glass inner packaging; and. a. Mixtures of one or more organic lead mixtures (such as tetraethyl lead, triethylmethyl lead, diethyldimethyl lead, ethyltrimethyl lead, and tetramethyl lead) with one or more halogen compounds (such as ethylene dibromide and ethylene dichloride), hydrocarbon solvents or other equally efficient stabilizers; or. The presence of a Class 8 hazard must be communicated as required by this part for subsidiary hazards. (TOY CAPS) - HANDLE CAREFULLY OR TOY CAPS - HANDLE CAREFULLY; and. Lead-free Solder Figure 3: Engineer soldering a microcircuit Note, Tin here is the primary metal. 23 This material may be transported under the provisions of Division 4.1 only if it is so packed that the percentage of diluent will not fall below that stated in the shipping description at any time during transport. The components may be placed in the same outer packaging provided they will not interact dangerously in the event of leakage. B130 When transported by motor vehicle, used diatomaceous earth filter material is not subject to any other requirements of this subchapter except for the shipping paper requirements of subpart C of part 172 of this subchapter; emergency response information as required by 172.602(a)(2) through (a)(7) of this subchapter; and the marking requirements of 172.302 of this subchapter, if the following requirements are met: a. Packagings are non-DOT specification sift-proof motor vehicles or sift-proof roll-on/roll-off bulk bins, which are covered by a tarpaulin or other equivalent means. the hierarchy of the document. These articles must be tested in accordance with Test series 6(c) of Part I of the UN Manual of Tests and Criteria (incorporated by reference; see 171.7 of this subchapter), with no explosion of the device, no fragmentation of device casing or pressure vessel, and no projection hazard or thermal effect that would significantly hinder fire-fighting or other emergency response efforts in the immediate vicinity. The following tables list, and set forth the requirements of, the special provisions referred to in column 7 of the 172.101 table. 38 If this material shows a violent effect in laboratory tests involving heating under confinement, the labeling requirements of Special Provision 53 apply, and the material must be packaged in accordance with packing method OP6 in 173.225 of this subchapter. guide. b. For single packagings, each packaging must correspond to a design type that has passed a leakproofness test at the Packing Group II level. For a battery whose voltage (electrical potential) exceeds 9 volts -, (1) When contained in a device, the device must be packaged in a manner that prevents unintentional activation or must have an independent means of preventing unintentional activation (e.g., packaging restricts access to activation switch, switch caps or locks, recessed switches, trigger locks, temperature sensitive circuit breakers, etc. Where different hazardous materials in limited quantities are packed together in the same outer packaging, when a gross mass is indicated Column 4 of 173.27 Table 3, the net quantity of each hazardous material must be shown in addition to the gross mass of the completed package. In addition, a lighter design intended to contain a non-pressurized Class 3 material is excepted from the examination and testing criteria specified in 173.308(b)(3). 125 Lactose or glucose or similar materials may be used as a phlegmatizer provided that the substance contains not less than 90%, by mass, of phlegmatizer. When column 7 of the Hazardous Materials Table (49 CFR 172.101) includes a special provision code for an entry in the table, the requirement of that code - or codes, there may be several of them - is in addition to the general packaging requirements of 173.24 and any other applicable packaging requirements in Part 173. meet the venting requirements in 173.24(g) or (2.) 386 When transported by private motor carrier only, the following corrosive liquids may be packaged in polyethylene bottles with a capacity no greater than 3.785 L (one gallon), further packed inside an open-top, heavy wall, high density polyethylene box (i.e., crate) in a manner that the polyethylene bottles are not subjected to any superimposed weight, and the boxes must be reasonably secured against shifting within the transport vehicle and loaded so as to minimize the possibility of coming in contact with other lading: Compounds, cleaning liquid, NA1760, PG II or III; Corrosive liquid, acidic, inorganic, n.o.s., UN3264, PG II; Corrosive liquid, acidic, organic, n.o.s., UN3265, PG III; Corrosive liquid, basic, inorganic, n.o.s., UN3266, PG II; Hydrochloric acid solution, UN1789, PG II; and. These special provisions are in addition to the standard packaging requirements. B68 Sodium must be in a molten condition when loaded and allowed to solidify before shipment. Transport in accordance with this special provision must be noted on the shipping paper. TP19 The calculated wall thickness must be increased by 3 mm at the time of construction. They must be classified in accordance with the procedure as set out in the Manual of Tests and Criteria, part III, section 39 (IBR, see 171.7 of this subchapter). They will appear as a list of codes that are defined in 172.102 of the Code of Federal Regulations. B115 Rail cars, highway trailers, roll-on/roll-off bins, or other non-specification bulk packagings are authorized. Samples taken at random must withstand the prescribed tests without breakage or leakage. 118 This substance may not be transported under the provisions of Division 4.1 unless specifically authorized by the Associate Administrator (see UN0143 or UN0150 as appropriate). Column 7: Special provisions. Liquefied compressed gases are assigned to portable tank instruction T50. The tank car specification may be marked to indicate a test pressure of 13.79 Bar (200 psig). d. In addition to the training requirements prescribed in 172.700 through 172.704, each driver must be trained regarding the properties and hazards of diatomaceous earth filter material, precautions to ensure safe transport of the material, and actions to be taken in the event of an emergency during transportation, or a substantial delay in transit. TP16 The portable tank must be protected against over and under pressurization which may be experienced during transportation. Table I - Maximum Ambient Temperature - Gasoline. Interior heating coils are not authorized. The purpose of this article is to explain the meaning of the coding system for the Special Provisions of column 7 in order to facilitate your review and understanding of them and how they may apply to your shipment of a hazardous material. - Other Regulations Relating to Transportation, - Pipeline and Hazardous Materials Safety Administration, Department of Transportation, - Hazardous Materials Table, Special Provisions, Hazardous Materials Communications, Emergency Response Information, Training Requirements, and Security Plans, - Table of Hazardous Materials and Special Provisions, https://www.ecfr.gov/current/title-49/subtitle-B/chapter-I/subchapter-C/part-172/subpart-B/section-172.102. A100 Lithium ion cells and batteries must be offered for transport at a state of charge not exceeding 30 percent of their rated capacity. For non-pressurized lighters containing a Class 3 (flammable liquid) material, its design, description, and packaging must be approved by the Associate Administrator prior to being offered for transportation or transported in commerce. N34 Aluminum construction materials are not authorized for any part of a packaging which is normally in contact with the hazardous material. Symbols, if used, must be registered with the Associate Administrator. These detectors must have a minimum burst pressure of 1800 kPa as demonstrated by design type qualification testing; and. Subscribe to: Changes in Title 49 :: Subtitle B :: Chapter I :: Subchapter C :: Part 172 :: Subpart B :: Section 172.102. (1) Even though certain packagings are specified in this part, it is, nevertheless, the responsibility of the person offering a hazardous material for transportation to ensure that such packagings are compatible with their lading. For portable tanks used for the transport of refrigerated liquefied helium and refrigerated liquefied atmospheric gas (except oxygen), the maximum rate at which the tank is filled must not exceed the liquid flow capacity of the pressure relief device rated at 130 percent of the portable tank's design pressure. (b) Preparation for transport. For transportation by aircraft, as an inner packaging of a combination packaging with a maximum gross mass of 30 kg when packaged as a limited quantity in accordance with 173.27(f). Column 7 specifies codes for special provisions applicable to hazardous materials. 165 These substances are susceptible to exothermic decomposition at elevated temperatures. B57 Class 115A tank car tanks used to transport chloroprene must be equipped with a non-reclosing pressure relief device of a diameter not less than 305 mm (12 inches) with a maximum rupture disc pressure of 310 kPa (45 psig). 340 This entry applies only to the vessel transportation of nickel-metal hydride batteries as cargo. The guns are packaged in accordance with Packing Method US 1 as specified in 173.62 of this subchapter. The maximum degree of filling must not exceed the degree of filling determined by the following: tr is the maximum mean bulk temperature during transport, tf is the temperature in degrees celsius of the liquid during filling, and. B2 MC 300, MC 301, MC 302, MC 303, MC 305, and MC 306 and DOT 406 cargo tanks are not authorized. For vessel transport, the palletized loads, pallet boxes or unit load devices must be firmly packed and secured in closed cargo transport units; or. Packagings must be sift-proof, prevent liquid water from reaching the hazardous material, and be provided with sufficient venting to preclude dangerous accumulation of flammable, corrosive, or toxic gaseous emissions such as methane, hydrogen, and ammonia. 197 The nitrocellulose must meet the criteria of the Bergmann-Junk test or methyl violet paper test in the UN Manual of Tests and Criteria, Appendix 10 (IBR, see 171.7 of this subchapter). N78 Packages consisting of inner glass, earthenware, or polyethylene or other nonfragile plastic bottles or jars not over 0.5 kg (1.1 pounds) capacity each, or metal cans not over five pounds capacity each, packed in outer wooden boxes, barrels or kegs, or fiberboard boxes are authorized and need not conform to the requirements of part 178 of this subchapter. TP27 A portable tank having a minimum test pressure of 4 bar (400 kPa) may be used provided the calculated test pressure is 4 bar or less based on the MAWP of the hazardous material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the MAWP. A hypochlorite solution, UN1791, is a Class 8 corrosive material. (b) Description of codes for special provisions. c. The motor carrier must maintain a satisfactory safety rating as prescribed in 49 CFR part 385. 21 This material must be stabilized by appropriate means (e.g., addition of chemical inhibitor, purging to remove oxygen) to prevent dangerous polymerization (see 173.21(f) of this subchapter). authorized by name in the Hazardous Materials Table or have been specifically authorized by name either in the Section 172.101 Hazardous Materials Table or have been assigned a shipping name and hazard class by the Associate Administrator for Hazardous Materials Safety. 45 Temperature should be maintained between 18 C (64.4 F) and 40 C (104 F). TP31 This hazardous material may only be transported in tanks in the solid state. A current copy of CGA pamphlet, CGA C-6 must be available at the facility servicing the life-saving appliance. 47 Mixtures of solids that are not subject to this subchapter and flammable liquids may be transported under this entry without first applying the classification criteria of Division 4.1, provided there is no free liquid visible at the time the material is loaded or at the time the packaging or transport unit is closed. 391 Except for articles being transported by motor vehicle as a material of trade in accordance with 173.6 of this subchapter, articles containing hazardous materials of Division 2.3, or Division 4.2, or Division 4.3, or Division 5.1, or Division 5.2, or Division 6.1 (substances with an inhalation toxicity of Packing Group I) and articles containing more than one of the following hazards: (1) Gases of Class 2; (2) Liquid desensitized explosives of Class 3; or (3) Self-reactive substances and solid desensitized explosives of Division 4.1, may only be offered for transportation and transported under conditions approved by the Associate Administrator. c. Primary receptacles may also be further packed in specification bulk outer packagings. Choosing an item from TP28 A portable tank having a minimum test pressure of 2.65 bar (265 kPa) may be used provided the calculated test pressure is 2.65 bar or less based on the MAWP of the hazardous material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the MAWP. 129 These materials may not be classified and transported unless authorized by the Associate Administrator on the basis of results from Series 2 Test and a Series 6(c) Test from the UN Manual of Tests and Criteria (IBR, see 171.7 of this subchapter) on packages as prepared for transport. 325 In the case of non-fissile or fissile-excepted uranium hexafluoride, the material must be classified under UN 2978. 43 The membrane filters, including paper separators and coating or backing materials, that are present in transport, must not be able to propagate a detonation as tested by one of the tests described in the UN Manual of Tests and Criteria, Part I, Test series 1(a) (IBR, see 171.7 of this subchapter). 360 Vehicles powered only by lithium batteries must be described using UN3171, Battery-powered vehicle. Lithium batteries installed in a cargo transport unit, designed only to provide power external to the transport unit, must be described using UN3536, Lithium batteries installed in a cargo transport unit., 361 Capacitors with an energy storage capacity of 0.3 Wh or less are not subject to the requirements of this subchapter. W10 When offered for transportation by vessel, the use of Large Packagings (see 171.8 of this subchapter) is prohibited. Company Name: Artisan EHS Consulting, LLC. The letter Z shown in the marking code for composite IBCs must be replaced with a capital code letter designation found in 178.702(a)(2) of this subchapter to specify the material used for the other packaging. Organization and Purpose (8) A code containing the letters TP refers to a portable tank special provision for UN or IM Specification portable tanks that is in addition to those provided by the portable tank instructions or the requirements in part 178 of this subchapter. You are using an unsupported browser. A53 Refrigerating machines and refrigerating machine components are not subject to the requirements of this subchapter when containing less than 12 kg (26.4 pounds) of a non-flammable gas or when containing 12 L (3 gallons) or less of ammonia solution (UN2672) (see 173.307 of this subchapter). The portable tank must not be used if the wall thickness is less than that prescribed by the applicable T code in Column (7) of the Table for this material. B52 Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure relief devices are authorized on DOT 57 portable tanks. and are not subject to requirements of this subchapter except for the following: (a) Incident reporting. (6) R codes. e. When transported by highway, rail, vessel, or as cargo on an aircraft, neutron radiation detectors containing not more than 1 gram of boron trifluoride, including those with solder glass joints are not subject to any other requirements of this subchapter provided they meet the requirements in paragraph a of this special provision and are packed in accordance with paragraph b of this special provision. N32 Aluminum materials of construction are not authorized for single packagings. Column 1 specifies the T Code. With less than 25 percent but not less than 10 percent formaldehyde, must be described as UN3334, Aviation regulated liquid, n.o.s. If one of the components, which can be a pure substance or a mixture, is classed as flammable, the chemical under pressure must be classed as flammable in Division 2.1. Uranium hexafluoride may be classified under this entry only if the conditions of 173.420(a)(4) and (6) and (d) and 173.421(b) and (d) of this subchapter, and, for fissile-excepted material, the conditions of 173.453 of this subchapter are met. (5) Each receptacle shall be able to withstand a pressure of 20 bar (2000 kPa) without leakage when the pressure relief device is deactivated. 49 CFR 172.101
Legalmatch Founder Convicted Felon, Miriam Thomas Wtvd, Murders In Citrus County Florida, Articles C